Call 08048971183 77% Response Rate

Send Email

Ball Screws

We provide our customers a broad array of Ball Screws that is made using supreme quality raw material.

THK Ball Screw
  • THK Ball Screw
  • THK Ball Screw
  • THK Ball Screw
  • THK Ball Screw
  • THK Ball Screw

THK Ball Screw

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialTHK Ball screw
Size4 mm
Packaging TypeWooden Box
FinishingRolled & Ground Type
BrandTHK Japan
ColorSilver
Quantity Per Pack1
The lead angle accuracy of the ball screw is controlled in accordance with the JIS standardJIS B 1192 (ISO 3408).Accuracy grades C0 to C5 are defi ned in the linearity and the directional property, and C7 to C10 inthe travel distance error in relation to 300 mm.
Get Best QuoteRequest A Callback
THK LM Guide SR
  • THK LM Guide SR
  • THK LM Guide SR
  • THK LM Guide SR

THK LM Guide SR

Product Price: Rs 427 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
DurabilityHigh
ModelsSR-W/T , SR-TB , SR-V , SR-SB
Height6 -16
Width12 - 32
MaterialStainless steel
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since a retainer plate holds the balls, they will not fall off even if the LM block is removed from the LM rail. With the low sectional height and the high rigidity design of the LM block, this model achieves highly accurate and stable straight motio.

[Compact, Heavy Load]Since it is a compact designed model that has a low sectional height and a ball contact structure rigid in the radial direction, this model is optimal for horizontal guide units.
Get Best QuoteRequest A Callback
THK LM Guide GSR
  • THK LM Guide GSR
  • THK LM Guide GSR
  • THK LM Guide GSR

THK LM Guide GSR

Product Price: Rs 450 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel
FeaturesCompact,Interchangeability
Type using standard materialIron-based
BrandTHK Japan
Balls roll in two rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off . As the top face of the LM block is inclined, a clearance is eliminated and an appropriate preload is applied simply by securing the LM block with mounting bolts. Model GSR has a special contact structure using circular-arc grooves. This increases self-adjusting capability and makes GSR an optimal model for places associated with diffi culty establishing high accuracy and for general industrial machinery. * Model GSR cannot be used in single-axis applications.
Get Best QuoteRequest A Callback
THK Caged Roller LM Guide SRN
  • THK Caged Roller LM Guide SRN
  • THK Caged Roller LM Guide SRN
  • THK Caged Roller LM Guide SRN

THK Caged Roller LM Guide SRN

Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
Usage/ApplicationIndustrial
Model NoSRN-C , SRN-LC, SRN-R
Corner radius for the LM rail r1 (max)1 , 1.5
Corner radius for the LM block r2 (max)1, 1.5 , 2
Shoulder height for the LM rail H15,6,8
SRN is an ultra-high rigidity Roller Guide that uses roller cages to allow low-friction, smooth motion and achieve long-term maintenance-free operation.
[Ultra-high Rigidity]A higher rigidity is achieved by using highly rigid rollers as the rolling elements and having the overall roller length more than 1.5 times greater than the roller diameter.
[4-way Equal Load]Since each row of rollers is arranged at a contact angle of 45???so that the LM block receives an equal load rating in all directions (radial, reverse radial and lateral directions), high rigidity is ensured in all directions.
[Smooth Motion through Skewing Prevention]The roller cage allows rollers to form an evenly spaced line while circulating, thus preventing the rollers from skewing as the block enters an loaded area. As a result, fl uctuation of the rolling resistance is minimized, and stable, smooth motion is achieved.
[Long-term Maintenance-free Operation]Use of roller cages eliminates friction between rollers and increases grease retention, enabling longterm maintenance-free operation to be achieved.
[Low-Profi le Low Center of Gravity]Because it has a lower total height than the Caged Roller LM Guide Model SRG, it is ideal for compactdesigns.
Get Best QuoteRequest A Callback
THK Rolled Ball Screw WHF
  • THK Rolled Ball Screw WHF
  • THK Rolled Ball Screw WHF
  • THK Rolled Ball Screw WHF

THK Rolled Ball Screw WHF

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
Usage/ApplicationIndustrial
MaterialStainless Steel
ModelWHF 1530-3.4 , WHF 1540-3.4 , WHF 2525-3.4
Outer diameter32 mm - 45 mm
This Ball Screw for high-speed feed achieves a DN value of 100,000 by using a new circulation structure. Since the nut outer diameter and the mounting holes of this model are dimensionally interchangeable with the previous model WTF, model WTF can be replaced with this model. (WHF1530, WHF2040 and WHF2550)
Get Best QuoteRequest A Callback
THK Rolled Ball Screw BLK
  • THK Rolled Ball Screw BLK
  • THK Rolled Ball Screw BLK
  • THK Rolled Ball Screw BLK

THK Rolled Ball Screw BLK

Product Price: Rs 430 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Materialstainless steel
BrandTHK Japan
Usage/ApplicationIndustrial
Model No.BLK 1510-5.6 , BLK 3232-3.6 , BLK 5050-2.8 etc
Outer diameter34 mm - 90 mm
THK Rolled Ball Screws are low priced feed screws that use a screw shaft rolled with high accuracy and specially surface-ground, instead of a thread-ground shaft used in the Precision Ball Screws. The ball raceways of the ball screw nut are all thread-ground, thus to achieve a smaller axial clearance and smoother motion than the conventional rolled ball screw. Using an end-cap method, these models achieve stable motion in a high-speed rotation. 
Get Best QuoteRequest A Callback
THK Precision Ball Screw BNT
  • THK Precision Ball Screw BNT
  • THK Precision Ball Screw BNT
  • THK Precision Ball Screw BNT

THK Precision Ball Screw BNT

Product Price: Rs 200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Width34 - 100
Usage/ApplicationIndustrial
Materialstainless steel
BrandTHK Japan
ModelBNT 1404-3.6 , BNT 1405-2.6 , BNT 1605-2.6 etc
Screw shaft outer diameter14 mm - 45 mm
Since mounting screw holes are drilled on the square ball screw nut, this model can compactly be mounted on the machine without a housing.
Get Best QuoteRequest A Callback
THK Miniature Rolled Ball screw MTF
  • THK Miniature Rolled Ball screw MTF
  • THK Miniature Rolled Ball screw MTF
  • THK Miniature Rolled Ball screw MTF

THK Miniature Rolled Ball screw MTF

Product Price: Rs 320 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
SizeMTF 0601-3.7 , MTF 0802-3.7 , MTF 1002-3.7
Usage/ApplicationIndustrial
Materialstainless steel
Outer diameter13 mm - 25 mm
A miniature type with a screw shaft diameter of Φ6 to Φ12 mm and a lead of 1 to 2 mm.Model MTF is only sold as sets (ball screw nut and screw shaft). Model MTF is applied only with anti-rust oil.
Get Best QuoteRequest A Callback
THK Rolled Ball Screw JPF
  • THK Rolled Ball Screw JPF
  • THK Rolled Ball Screw JPF
  • THK Rolled Ball Screw JPF

THK Rolled Ball Screw JPF

Product Price: Rs 330 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
Usage/ApplicationIndustrial
Materialstainless steel
ModelJPF 1404-4 , JPF 1405-4 , JPF 1605-4
centerto-center diameter14.4 - 41.75
This Ball Screw achieves zero-backlash through a constant preloading method by shifting the phase with the central part of a simple nut as the spring structure.
Get Best QuoteRequest A Callback
THK Rolled Ball Screw BTK-V
  • THK Rolled Ball Screw BTK-V
  • THK Rolled Ball Screw BTK-V
  • THK Rolled Ball Screw BTK-V

THK Rolled Ball Screw BTK-V

Product Price: Rs 320 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Materialstainless steel
BrandTHK Japan
Usage/ApplicationIndustrial
Outer diameter26 mm -102 mm
Standard shaft length200 - 4000
A compact, round type Ball Screw with a ball screw nut incorporated with a return pipe. The flange circumference is cut flat at the top and bottom, allowing the shaft center to be positioned low.
Get Best QuoteRequest A Callback
THK Rolled Ball Screw CNF
  • THK Rolled Ball Screw CNF
  • THK Rolled Ball Screw CNF
  • THK Rolled Ball Screw CNF

THK Rolled Ball Screw CNF

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
BrandTHK Japan
Types of NutsSingle nut
Type using standard materialIron-based
DN Value70000
With a combination of 4 rows of large-lead loaded grooves and a long nut, this Ball Screw achieves a long service life.
Get Best QuoteRequest A Callback
THK Precision Ball Screw BLW
  • THK Precision Ball Screw BLW
  • THK Precision Ball Screw BLW
  • THK Precision Ball Screw BLW

THK Precision Ball Screw BLW

Product Price: Rs 308 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless steel
BrandTHK Japan
Usage/ApplicationIndustrial
I Deal InNew Only
Number of threaded grooves2
Standard greaseAFB-LF
Since a preload is provided through a spacer between two large lead nuts, high-speed feed without by backlash is ensured.
Get Best QuoteRequest A Callback
THK Precision Ball Screw DKN
  • THK Precision Ball Screw DKN
  • THK Precision Ball Screw DKN
  • THK Precision Ball Screw DKN

THK Precision Ball Screw DKN

Product Price: Rs 331 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
I Deal InNew Only
Materialstainless steal
Model Name/NumberDKN 4020-3 , DKN 5020-3
Screw shaft outer diameter40 mm - 63 mm
Ball center-to- center diameter41.75 mm - 65.7 mm
A preload is provided via a spacer between the two combined ball screw nuts to achieve a below-zero axial clearance (under a preload).  
Get Best QuoteRequest A Callback
THK Precision Ball Screw BNFN
  • THK Precision Ball Screw BNFN
  • THK Precision Ball Screw BNFN
  • THK Precision Ball Screw BNFN

THK Precision Ball Screw BNFN

Product Price: Rs 310 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
Usage/ApplicationIndustrial
Materialstainless steel
Flange diameter144 mm - 180 mm
Applied preload(N)1670
The most common type with a preload provided via a spacer between the two combined ball screw nuts to eliminate the backlash. It can be mounted using the bolt holes drilled on the fl ange. 
Get Best QuoteRequest A Callback
THK Precision Ball Screw DIK
  • THK Precision Ball Screw DIK
  • THK Precision Ball Screw DIK
  • THK Precision Ball Screw DIK

THK Precision Ball Screw DIK

Product Price: Rs 540 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Materialstainless steel
BrandTHK Japan
Usage/ApplicationIndustrial
ModelDIK 1404-4 , DIK 1404-6
Outer diameter26 MM - 45 MM
Screw shaft outer diameter14MM - 28MM
The right and the left screws are provided with a phase in the middle of the ball screw nut, and an axial clearance is set at a below-zero value (under a preload). This compact model is capable of a smooth motion.  
Get Best QuoteRequest A Callback
THK Precision Caged Ball Screw SBK
  • THK Precision Caged Ball Screw SBK
  • THK Precision Caged Ball Screw SBK
  • THK Precision Caged Ball Screw SBK

THK Precision Caged Ball Screw SBK

Product Price: Rs 448 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Materialstainless steel
Usage/ApplicationIndustrial
BrandTHK Japan
Diameter63-120
Ball center-to- center diameter66.5 MM - 124.0 MM
Outer diameter140 mm - 210 mm
High-Speed Ball Screw with Caged ball technology . Structure of large lead SBK type Circulate toward the Circulate toward the tangential direction lead-angle direction  Ball circulation structu High-Speed Ball Screw with Caged Ball model SBK, balls are evenly spaced by a ball cage to eliminate collision and friction between the balls and ensure a high level of grease retention. As a result, low noise, high-speed fluctuation and long-term maintenance-free In addition, this model has an ideal circulation structure where balls are picked up at the tangential direction
Get Best QuoteRequest A Callback
THK Precision Ball Screw/Spline BNS-A / BNS
  • THK Precision Ball Screw/Spline BNS-A / BNS
  • THK Precision Ball Screw/Spline BNS-A / BNS
  • THK Precision Ball Screw/Spline BNS-A / BNS

THK Precision Ball Screw/Spline BNS-A / BNS

Product Price: Rs 300 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Screw shaft outer diameter16 mm - 50 mm
Lead16 mm - 50 mm
Types of NutsSingle Nuts
Dust cover typeBellows
DN Value70000
 A Stroke/Rotary unit that has Ball Screw grooves and a Ball Spline groove crossing one another on a single shaft. The nuts of the Ball Screw and the Ball Spline have dedicated support bearings directly embedded on the circumference of the nuts.
Get Best QuoteRequest A Callback
THK Ball Screw SBKH
  • THK Ball Screw SBKH
  • THK Ball Screw SBKH
  • THK Ball Screw SBKH

THK Ball Screw SBKH

Product Price: Rs 300 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
BrandTHK Japan
MaterialIron-based
Maximum service temperature(Centigrade DegreeC)80
Shaft process methodPrecision
Standard greaseL500
Standard sealRR
High-Load, High-Speed Caged Ball Screw model SBKH is a ball screw that achieves a high load carrying capacity and is capable of high-speed operation (92 m/min at a maximum). It provides both the high load carrying capacity of High-Load Caged Ball Screw model HBN, and the high-speed performance of High-Speed Ball Screw model SBK, whichare among THK’s Ball Screw series.
Get Best QuoteRequest A Callback
THK Ball Guide VB/VR
  • THK Ball Guide VB/VR
  • THK Ball Guide VB/VR
  • THK Ball Guide VB/VR

THK Ball Guide VB/VR

Product Price: Rs 3,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel
Model No.VR 1-20x5Z , VR 1-30x7Z , VR 1-40x10Z
Dynamic rating CZ0.152 kN - 0.639kN
Static rating C0Z0.153 kN - 0.611 kN
THK's Cross Roller Guide provides rigid yet supple linear motion. It has precision rollers orthogonalized alternately.
Get Best QuoteRequest A Callback
THK Linear Guide HSR45
  • THK Linear Guide HSR45
  • THK Linear Guide HSR45
  • THK Linear Guide HSR45

THK Linear Guide HSR45

Product Price: Rs 430 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel
FeaturesHigh Rigidity Type , Self-adjustment Capability]
Max Temp150 degree C
Outer dimensions24 -90
Outer dimensions Height24 -90
Outer dimensions Width47 -170
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. The high temperature type LM Guide is capable of being used at service temperature up to 150℃ thanks to THK’s unique technologies in material, heat treatment and lubrication. 
Get Best QuoteRequest A Callback
THK LM Guide HMG
  • THK LM Guide HMG
  • THK LM Guide HMG
  • THK LM Guide HMG

THK LM Guide HMG

Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless Steel
Usage/Applicationindustrial
BrandTHK Japan
ModelHMG 15A , HMG 25A , HMG 35A etc
Width47 - 170
The Straight-Curved Guide HMG is a new straight-curved guide that allows the same type of LMblocks to continuously move on straight and curved rails by combining the technologies of the LMGuide HSR and the R Guide HCR. It achieves drastic cost reduction through improvement of workeffi ciency at the assembly and conveyance lines and the inspection equipment and simplifi cation ofthe structure by eliminating a lift and a table.

[Freedom of Design]
It allows free combinations of straight and curved shapes.Since LM blocks can smoothly transit between the straight and curved sections, various combinationsof straight and curved rails can be joined into various shapes such as O, U, L and S shapes.In addition, HMG allows a large table to be mounted and a heavy object to be carried through combinationsof multiple blocks on a single rail or 2 or more LM rails. Thus, it provides great freedom ofdesign.
Get Best QuoteRequest A Callback
THK Linear Guide SR15-SSR15
  • THK Linear Guide SR15-SSR15
  • THK Linear Guide SR15-SSR15
  • THK Linear Guide SR15-SSR15

THK Linear Guide SR15-SSR15

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
FeaturesSuperb Planar Running Accuracy , Self-adjustment Capability
I Deal InNew Only
Outer dimensions Height24
Outer diameter Width52
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and ball cages and endplates incorporated in the LM block allow the balls to circulate. Use of the ball cage eliminates friction between balls and increases grease retention, thus to achieve low noise, high speed and long-term maintenance-free operation. 
Get Best QuoteRequest A Callback
THK Linear Guide SR30-SSR30
  • THK Linear Guide SR30-SSR30
  • THK Linear Guide SR30-SSR30
  • THK Linear Guide SR30-SSR30

THK Linear Guide SR30-SSR30

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
FeaturesSuperb Planar Running Accuracy , Self-adjustment Capability
Outer dimensions Height42
Outer diameter Width90
BrandTHK Japan
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and ball cages and endplates incorporated in the LM block allow the balls to circulate. Use of the ball cage eliminates friction between balls and increases grease retention, thus to achieve low noise, high speed and long-term maintenance-free operation. 
Get Best QuoteRequest A Callback
THK Linear Guide SR55
  • THK Linear Guide SR55
  • THK Linear Guide SR55
  • THK Linear Guide SR55

THK Linear Guide SR55

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel
FeaturesLow Noise , High Durability
BrandTHK Japan
Deal InNew Only
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since a retainer plate holds the balls, they will not fall off even if the LM block is removed from the LM rail. With the low sectional height and the high rigidity design of the LM block, this model achieves highly accurate and stable straight motion.  
Get Best QuoteRequest A Callback
THK Wide Linear Guide HRW27
  • THK Wide Linear Guide HRW27
  • THK Wide Linear Guide HRW27
  • THK Wide Linear Guide HRW27

THK Wide Linear Guide HRW27

Product Price: Rs 320 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
I Deal InNew Only
BrandTHK Japan
Outer dimensions Height27
Outer deimensions Width80
Outer dimensions Length72.8
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off even if the LM rail is pulled out. (except models HRW 12 and 14LR). Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. In addition, the LM block can receive a well-balanced preload, increasing the rigidity in four directions while maintaining a constant, low friction coeffi cient. In a low center of gravity structure with a large rail width and a low overall height, this model can be used in places where space saving is required or high rigidity against a moment is required even in a single axis confi guration. 
Get Best QuoteRequest A Callback
THK Wide Linear Guide HRW50
  • THK Wide Linear Guide HRW50
  • THK Wide Linear Guide HRW50
  • THK Wide Linear Guide HRW50

THK Wide Linear Guide HRW50

Product Price: Rs 320 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
BrandTHK Japan
Outer dimensions Height50
Outer diameter Length140.5
Outer Dimensions Width162
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off even if the LM rail is pulled out. (except models HRW 12 and 14LR). Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. In addition, the LM block can receive a well-balanced preload, increasing the rigidity in four directions while maintaining a constant, low friction coeffi cient. In a low center of gravity structure with a large rail width and a low overall height, this model can be used in places where space saving is required or high rigidity against a moment is required even in a single axis confi guration. 
Get Best QuoteRequest A Callback
THK Precision Ball Screw WGF
  • THK Precision Ball Screw WGF
  • THK Precision Ball Screw WGF

THK Precision Ball Screw WGF

Product Price: Rs 320 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Materialstainless steel
BrandTHK Japan
Overall length27 MM - 198 MM
Outer diameter18 mm - 90 mm
The Model WGF can be equipped with a brush seal depending on the model number. Contact THK if you would like to use one. The overall length of the nut will increase when equipping the QZ lubricating device.
Get Best QuoteRequest A Callback
THK LM Case Unit SH/SH-L
  • THK LM Case Unit SH/SH-L
  • THK LM Case Unit SH/SH-L

THK LM Case Unit SH/SH-L

Product Price: Rs 350 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Model No.SH 3UU , SH 4UU , SH 5UU etc
Outer dimensions Height14 - 49
Outer dimensions Width10 -42
Outer dimensions Length13 -44
BrandTHK Japan
A long version of model SH, this model is a case unit that contains two units of the standard type. Linear Bushing in an aluminum casing.
Get Best QuoteRequest A Callback
THK Ground Ball Screw
  • THK Ground Ball Screw
  • THK Ground Ball Screw
  • THK Ground Ball Screw
  • THK Ground Ball Screw

THK Ground Ball Screw

Product Price: Rs 400 / pieceGet Best Price

Minimum Order Quantity: 1 piece

Product Brochure

Product Details:
Size4mm
MaterialSS
BrandTHK Japan
Usage/ApplicationIndustial
FinishPolished
Country of OriginMade in India
The Ball Screw is a high-efficiency feed screw with the ball making a rolling motion between the screw axis and the nut. Compared with a conventional sliding screw, this product has drive torque of one-third or less, making it most suitable for saving drive motor power.

Additional Information:

  • Delivery Time: 1 week
  • Packaging Details: wooden box
Get Best QuoteRequest A Callback
THK Rolled Ball Screw

THK Rolled Ball Screw

Product Price: Rs 750 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Size6mm
MaterialPolyurethane
BrandTHK JAPAN
Usage/ApplicationIndustial
FinishPolished
Country of OriginMade in India
The Ball screw is a high-efficiency feed screw with the ball making a rolling motion between the screw axis and nuts.Compared with a conventional sliding screw,this product has drive torque of one-third or less, making it most suitable for saving drive motor power.
Get Best QuoteRequest A Callback
THK Ball Spline LF
  • THK Ball Spline LF
  • THK Ball Spline LF
  • THK Ball Spline LF

THK Ball Spline LF

Product Price: Rs 230 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Outer Diameter14mm - 80 mm
I Deal InNew Only
BrandTHK Japan
MaterialStainless Steel
ModelLF 6 , LF 8, LF 13
The spline nut can be attached to the housing via the flange, making assembly simple.
It is optimal for locations where the housing may be deformed if a keyway is machined on its surface, and where the housing width is small.
Since it allows a dowel pin to be driven into the flange, angular backlash occurring in the fitting can completely be eliminated.
Get Best QuoteRequest A Callback
THK Link Ball BL
  • THK Link Ball BL
  • THK Link Ball BL
  • THK Link Ball BL

THK Link Ball BL

Product Price: Rs 250 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
MaterialStainlesss Steel
I Deal InNew Only
Length L38 mm - 83 mm
Diameter D16 mm - 38 mm
Height M32.6 mm - 80 mm
This model’s holder made of high strength-zinc alloy is connected in perpendicular to the ball shank. With grease pockets provided on the top and bottom of the spherical area, this model achieves high lubricity and high wear resistance.
Get Best QuoteRequest A Callback
THK Link Ball RBI
  • THK Link Ball RBI
  • THK Link Ball RBI
  • THK Link Ball RBI

THK Link Ball RBI

Product Price: Rs 159 / PieceGet Best Price

Product Brochure

Product Details:
BrandTHK Japan
Model Name/NumberRBI 5D , RBI 6D , RBI 8D
MaterialStainlesss Steel
Outer Diameterlength 46 mm - 118 mm
I Deal InNew Only
Tensile CS5690 N - 29800N
With this Link Ball model, the high strength zinc alloy is used in its holder and the mounting bolt and the holder are arranged on the same axis, allowing this model to receive both a compressive load and a pulling load. Since grease is contained in the boot, this model achieves high lubricity and high wear resistance.
Get Best QuoteRequest A Callback
2 Pieces Curvic DCL Coupling
  • 2 Pieces Curvic DCL Coupling
  • 2 Pieces Curvic DCL Coupling

2 Pieces Curvic DCL Coupling

Product Price: Rs 200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
I Deal InNew Only
Model No06-050-22XV , 050-36XV etc
No of teeth8, 10, 12
Outside Diameter29 - 398
It has simple structure. High accuracy used to dowel.Customized manufacturing for specific purpose is available.
Get Best QuoteRequest A Callback
KHK Ratchets & Pawls SRT/SRT-C
  • KHK Ratchets & Pawls SRT/SRT-C
  • KHK Ratchets & Pawls SRT/SRT-C

KHK Ratchets & Pawls SRT/SRT-C

Product Price: Rs 200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
I Deal InNew Only
Model No.SRT2/3-50 , SRT2/3-60 etc
teeth50 -100
Pitch2.09 - 12.57
KHK SRT1-C, Size 1, Pawls Pawls (SRT-C). Pawls limit direction of spin to one direction; has induction hardened tips for superior durability.
Get Best QuoteRequest A Callback
THK Original Grease AFB-LF

THK Original Grease AFB-LF

Product Price: Rs 300 / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Product Details:
I Deal InNew Only
BrandTHK Japan
FeaturesExtreme pressure resistance, Mechanical stability
Base OilRefined mineral oil
Usage/ApplicationIndustrial
AFB-LF Grease is a general-purpose grease that provides excellent extreme pressure performance and mechanical stability properties through the use of a refi ned mineral oil base oil and a lithiumbased consistency enhancer.

[Features] (1) Extreme pressure resistance The action of the special additives provides higher wear resistance and extreme pressure resistance than other lithium-based greases available on the market. (2) Mechanical stability AFB-LF Grease is not easily softened and demonstrates excellent mechanical stability even when used for a long period of time. (3) Long service life It provides many times the lubrication life of general lithium soap-based greases. As a result, it off ers a lower maintenance workload and greater economy due to the longer intervals between greasing.
Get Best QuoteRequest A Callback
THK Original Grease AFG

THK Original Grease AFG

Product Price: Rs 400 / KgGet Best Price

Minimum Order Quantity: 1 Kg

Product Brochure

Product Details:
Usage/ApplicationIndustrial
I Deal InNew Only
BrandTHK Japan
Base OilHigh grade synthetic oil
ColorBrown
Oil separation rate0.5 mass%
AFG Grease is a high-grade grease for ball screws that uses high-grade synthetic oil as its base and a urea-based grease as its consistency enhancer. This ensures that it has superior low heatgenerating properties, allowing for use over a wide temperature range—from low to high temperatures.

[Features]
(1) Low heat generation Since the viscous resistance is low, the grease generates only a minimal level of heat even during high-speed operation.
(2) Low torque properties Features a low base oil kinematic viscosity, making it ideal for ball screws.
(3) Water resistance AFG Grease is a highly water-resistant grease that is less vulnerable to softening and reductions in extreme pressure resistance due to moisture penetration.
Get Best QuoteRequest A Callback
THK Ball Screw EBC
  • THK Ball Screw EBC
  • THK Ball Screw EBC
  • THK Ball Screw EBC

THK Ball Screw EBC

Product Price: Rs 500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Part No.EBC 1605-4, EBC 2005-3
I Deal InNew Only
BrandTHK Japan
Screw shaft outer diameter16 -63
The rigidity values in the table represent spring constants each obtained from the load and the Elastic Deformation fi nish when providing an axial load 24% of the basic dynamic load rating (Ca). These values do not include the rigidity of the components related to mounting the nut. Therefore, it is normally appropriate to regard roughly 80% of the value in the table as the actual value. If the axial load (Fa) is not 0.24 Ca, the rigidity value (K N) is obtained from the following equation. 
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Apex Precision Mechatronix Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.