Call 08048971183 38% Response Rate

Send Email

Linear Guide

Offering you a complete choice of products which include thk lm guide hr, thk lm roller lru, thk linear ball slide lsp/ls/lsc, thk roller follower nast/ rnast/ nart / nurt, thk caged ball lm guide epf and thk lm guide actuator kr.
THK LM Guide HR
  • THK LM Guide HR
  • THK LM Guide HR
  • THK LM Guide HR

THK LM Guide HR

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless Steel
BrandTHK Japan
ModelsHR - Heavy-load Type , HR-T-Ultra-heavy Load Type
Height8.5 - 25
Width11.4 - 33.3
Balls roll in two rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off .Because of the angular contact structure where two rows of balls rolling on the LM rail each contact the raceway at 45???, the same load can be applied in all directions (radial, reverse radial and lateral directions) if a set of LM rails and LM block is mounted on the same plane (i.e., when two LM rails are combined with an LM block on the same plane). Furthermore, since the sectional height is low, a compact and stable linear guide mechanism is achieved.This structure makes clearance adjustment relatively easy, and is highly capable of absorbing a mounting error.
Get Best QuoteRequest A Callback
THK LM Roller LRU
  • THK LM Roller LRU
  • THK LM Roller LRU
  • THK LM Roller LRU

THK LM Roller LRU

Product Price: Rs 398 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless Steel
BrandTHK Japan
Usage/ApplicationIndustrial
Length L51mm - 206.4 mm
Thickness T14.283 mm - 57.15 mm
Metal ball retainer type. Since this model does not require a groove on the mounting surface, man-hours for machining can be reduced. By screwing bolts into four holes on the raceway base, it is secured on the mounting surface.
Get Best QuoteRequest A Callback
THK Linear Ball Slide LSP/LS/LSC
  • THK Linear Ball Slide LSP/LS/LSC
  • THK Linear Ball Slide LSP/LS/LSC
  • THK Linear Ball Slide LSP/LS/LSC
  • THK Linear Ball Slide LSP/LS/LSC

THK Linear Ball Slide LSP/LS/LSC

Product Price: Rs 3,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
Model Name/NumberLSP 1340, LSC 1015
Height25 mm , 30 mm
Width50 mm , 70 mm
Length80mm , 150mm
Rating C392kN etc
The base contains an air cylinder for drive. Feeding air from the two ports on the side face of the base allows the slide to perform reciprocating motion.
Get Best QuoteRequest A Callback
THK Roller Follower NAST/ RNAST/ NART / NURT
  • THK Roller Follower NAST/ RNAST/ NART / NURT
  • THK Roller Follower NAST/ RNAST/ NART / NURT
  • THK Roller Follower NAST/ RNAST/ NART / NURT

THK Roller Follower NAST/ RNAST/ NART / NURT

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
TypeRoller
ShapeCylindrical outer ring
Usage/ApplicationIndustrial
I Deal InNew Only
BrandTHK Japan
A separable type of bearing that combines a thick-wall outer ring, an inner ring and needle rollers equipped with a precision cage. Since the structure is simple, it allows high accuracy to be achieved at low cost.

Model NAST (Separable Type) Specification Table⇒A20-10 Model NAST is a separable type of bearing system that combines a thick-wall outer ring, an inner ring and needle rollers equipped with a precision cage. Inner diameter: 6-50mm

Model NAST-ZZ (Separable Type, with Side Plates) 
Get Best QuoteRequest A Callback
THK Caged Ball LM Guide EPF
  • THK Caged Ball LM Guide EPF
  • THK Caged Ball LM Guide EPF
  • THK Caged Ball LM Guide EPF

THK Caged Ball LM Guide EPF

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel
Outer dimensions Height8mm -16 mm
Outer dimensions Width17 mm - 32 mm
Outer dimensions Length31.6 mm - 56.5 mm
Static rating C01.60 kN - 5.88 kN
Use of a ball cage eliminates friction between balls, and achieves low noise, acceptable running sound, long-term maintenance-free operation, and superbly high speed response.

The limited stroke minimizes fluctuation in rolling resistance, making this guide ideal for locations requiring smooth motion on short strokes.
Get Best QuoteRequest A Callback
THK LM Guide Actuator KR
  • THK LM Guide Actuator KR
  • THK LM Guide Actuator KR
  • THK LM Guide Actuator KR

THK LM Guide Actuator KR

Product Price: Rs 25,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless Steal
BrandTHK Japan
Model No.KR15 , KR20, KR26
Rolling resistance value0.2 , 0.5 ,0.6 etc
Seal resistance value0.7 , 0.8 , 2.0
he LM Guide Actuator is a compact actuator with high rigidity and high precision that has an integrated LM Guide with a ball screw.Integrated LM Guide and Ball Screw. High-rigidity / High-precision Actuator. LM Guide Actuator Model KR. 
Get Best QuoteRequest A Callback
THK LM Guide NR/NRS
  • THK LM Guide NR/NRS
  • THK LM Guide NR/NRS
  • THK LM Guide NR/NRS

THK LM Guide NR/NRS

Product Price: Rs 430 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel
I Deal InNew Only
ModelsNR-RX/NRS-RX , NR-LRX/NRS-LRX
Height31- 105
Width50- 200
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. The raceways are cut into deep grooves that have a radius closer to that of the balls than in the conventional design, using special equipment and an extremely precise cutting technique. This design allows high rigidity, high vibration/impact resistance and high damping capacity, all of which are required for machine tools, thus making these models capable of bearing ultra-heavy loads.

[Improved Damping Capacity]While the machine tool (equipped with NR or NRS) is not cutting a workpiece during operation, the LM Guide travels normally and smoothly. While the machine tool is cutting the workpiece, the cutting force is applied to the LM Guide to increase and the contact area between the balls and the raceway, allowing an appropriate mixture of rolling and sliding motions to be achieved. Accordingly, the friction resistance is increased and the damping capacity is improved. Since the absolute slip during the rolling and sliding motion is insignifi cant, it causes little wear and does not aff ect the service life.
Get Best QuoteRequest A Callback
THK LM Roller LRB/LRB-Z
  • THK LM Roller LRB/LRB-Z
  • THK LM Roller LRB/LRB-Z
  • THK LM Roller LRB/LRB-Z

THK LM Roller LRB/LRB-Z

Product Price: Rs 500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
I Deal InNew Only
Fixture ModelSMB, SEB
Shape of the mounting sectionFlat surface
standard materialIron-based
Installation procedureClamp
Metal ball retainer type. Since this model does not require a groove on the mounting surface, man-hours for machining can be reduced. As with model LRA, it can be firmly mounted using fixture SMB or SEB


Resin retainer type. A lighter type that uses a resin retainer and is designed to be mounted in the same manner as model LRB. Since it has a groove for installing a seal, a special rubber seal with a high contamination protection effect can easily be attached. In addition, this model is capable of traveling at high speed of 1 m/s.
Get Best QuoteRequest A Callback
THK LM Roller LRA/LRA-Z
  • THK LM Roller LRA/LRA-Z
  • THK LM Roller LRA/LRA-Z
  • THK LM Roller LRA/LRA-Z

THK LM Roller LRA/LRA-Z

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless Steel
I Deal InNew Only
ModelLRA 4095 , LRA 50130
Length L95 mm , 130 mm
Width W055mm , 76.2 mm
Metal ball retainer type. Just like model LR, this model is also designed to be fit into a groove. It is a compact type that can be firmly mounted using a fixture model SM or SE and thick bolts.
Get Best QuoteRequest A Callback
THK Linear Guide HRX
  • THK Linear Guide HRX
  • THK Linear Guide HRX
  • THK Linear Guide HRX

THK Linear Guide HRX

Product Price: Rs 430 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
Usage/ApplicationIndustrial
sizes35 ~ 65
Model No.HRX 25 - 65
Maximum seal resistance14 - 32

With the HRX series, THK offers a roller guide for applications that require a linear guide system with ultra-high rigidity and load capacity.

Characteristics of this series are the longer metal bodies of the blocks compared to other THK roller guides which include a higher number of rollers achieving an improved static load capacity.

Another feature of this series is the arrangement of the four raceways at a 45° contact angle, this means that the blocks have the same load ratings in all directions (radial, reverse radial and horizontal) ensuring a high level of rigidity in all directions and as a result this model can be used in any orientation and installation position.

Get Best QuoteRequest A Callback
THK Linear Guide HSR65
  • THK Linear Guide HSR65
  • THK Linear Guide HSR65
  • THK Linear Guide HSR65

THK Linear Guide HSR65

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
DesignCustomized
Usage/ApplicationIndustrial
MaterialStainless Steel
ColorSilver
Features4-way Equal Load , High Rigidity Type
BrandTHK Japan
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. The high temperature type LM Guide is capable of being used at service temperature up to 150℃ thanks to THK’s unique technologies in material, heat treatment and lubrication. 
Get Best QuoteRequest A Callback
THK  Linear Guide HSR100
  • THK  Linear Guide HSR100
  • THK  Linear Guide HSR100
  • THK  Linear Guide HSR100

THK Linear Guide HSR100

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel
Features4-way Equal Load , High Rigidity Type
Outer dimensions Height120
Outer diameter Width250
Outer dimensions Length334
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off even if the LM rail is pulled out (except models HSR 8, 10 and 12). Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. In addition, the LM block can receive a well-balanced preload, increasing the rigidity in the four directions while maintaining a constant, low friction coeffi cient. With the low sectional height and the high rigidity design of the LM block, this model achieves highly accurate and stable straight motion
Get Best QuoteRequest A Callback
THK Wide Linear Guide HRW21
  • THK Wide Linear Guide HRW21
  • THK Wide Linear Guide HRW21
  • THK Wide Linear Guide HRW21

THK Wide Linear Guide HRW21

Product Price: Rs 320 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Outer dimensions Height21
Outer dimensions Width68
Outer dimensions Length58.8
BrandTHK Japan
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off even if the LM rail is pulled out. (except models HRW 12 and 14LR). Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. In addition, the LM block can receive a well-balanced preload, increasing the rigidity in four directions while maintaining a constant, low friction coeffi cient. In a low center of gravity structure with a large rail width and a low overall height, this model can be used in places where space saving is required or high rigidity against a moment is required even in a single axis confi guration. 
Get Best QuoteRequest A Callback
THK Wide Linear Guide HRW35
  • THK Wide Linear Guide HRW35
  • THK Wide Linear Guide HRW35
  • THK Wide Linear Guide HRW35

THK Wide Linear Guide HRW35

Product Price: Rs 320 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
I Deal InNew Only
BrandTHK Japan
Outer diameter Width120
Outer dimensions Length106.6
Outer dimensions Height35
Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off even if the LM rail is pulled out. (except models HRW 12 and 14LR). Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. In addition, the LM block can receive a well-balanced preload, increasing the rigidity in four directions while maintaining a constant, low friction coeffi cient. In a low center of gravity structure with a large rail width and a low overall height, this model can be used in places where space saving is required or high rigidity against a moment is required even in a single axis confi guration. 
Get Best QuoteRequest A Callback
LM Stroke STI / MST / ST/ST-B
  • LM Stroke STI / MST / ST/ST-B
  • LM Stroke STI / MST / ST/ST-B
  • LM Stroke STI / MST / ST/ST-B

LM Stroke STI / MST / ST/ST-B

Product Price: Rs 1,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
MaterialStainless Steel
FeaturesA highly accurate slide unit can be produced at a low price.
Model No.MST 3-101050 , MST 3-101060 , MST 3-102050
Permissible load C068.6N - 137 N
Model ST has a ball cage and balls both incorporated into a precision-ground cylindrical nut as shown in Fig.1 . The balls are arranged in zigzags so as to evenly receive a load. The ball cage is a drilled cage made of a light alloy with high rigidity, and is capable of high-speed motion. A thrust ring and a snap ring are installed on both sides of the inner surface of the nut to prevent the ball cage from overshooting. This structure allows rotational motion, reciprocal motion and complex motion with a small friction coeffi cient. Model ST has a stroke length up to twice the range within which the ball cage can travel. Since high accuracy can be obtained at a low price, this model is used in a broad array of applications such as press die setting, ink roll unit of printing machine, workpiece chuck unit of punching press, press feeder, work head of electric discharge machine, wound roll corrector, spinning and weaving machine, distortion measuring equipment, spindle of optical measuring instrument, and photocopiers.
Get Best QuoteRequest A Callback
THK Precision Linear Pack ER
  • THK Precision Linear Pack ER
  • THK Precision Linear Pack ER
  • THK Precision Linear Pack ER

THK Precision Linear Pack ER

Product Price: Rs 300 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandTHK Japan
MaterialStainless Steel
Model Name/NumberER513+40L , ER513+60L
Width W13 mm - 25 mm
Outer rail dimensions40 mm- 140 mm
The Precision Linear Pack is a superbly thin and lightweight linear guide. It is most suitable for precision measuring devices, semiconductor manufacturing and inspection equipment, and other applications where accurate linear motion is essential.
Get Best QuoteRequest A Callback
THK Flat Roller FT/FTW
  • THK Flat Roller FT/FTW
  • THK Flat Roller FT/FTW
  • THK Flat Roller FT/FTW

THK Flat Roller FT/FTW

Product Price: Rs 430 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless Steel
Width10 mm- 80 mm
Usage/Applicationindustrial
ApplicationIndustrial
Length32 mm - 500 mm
ModelFT 2032 mm - 10-32 , FT 2515-45 , FT 3020-60
The LM Roller is a compact linear guide with high load performance and a mallet type roller able to make infinite circular motions. This product is optimally applicable to machines required for high positioning accuracy, repeatability and rigidity. 
Get Best QuoteRequest A Callback
THK Slide Pack FBW / E36RS
  • THK Slide Pack FBW / E36RS
  • THK Slide Pack FBW / E36RS
  • THK Slide Pack FBW / E36RS

THK Slide Pack FBW / E36RS

Product Price: Rs 1,200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Length160 mm - 1200 mm
Stroke Length ST without seal88 mm - 1128 mm
Stroke Length ST with seal83 mm - 1123 mm
Static Permissible Load590N
Slide Pack model FBW is an LM system in which a precision press molded slider that contains balls performs infinite straight motion. Used in combination with a slide rail, the Slide Pack achieves lightweight and compact design and smooth straight motion at a low price. The ball case and the slide rail are nitrided to ensure high wear resistance. (The slide rail of model FBW 2560R is made of stainless steel.) The Slide Pack is optimal for slide units of photocopiers, tool cabinets, electronic equipment cabinets, moving seats, automatic vending machines, machine tool slide covers, cash registers, heavy doors and curtain walls. 
Get Best QuoteRequest A Callback
LM Guide Actuator SKR / SKR55/65
  • LM Guide Actuator SKR / SKR55/65
  • LM Guide Actuator SKR / SKR55/65

LM Guide Actuator SKR / SKR55/65

Product Price: Rs 25,000 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless Steal
BrandTHK Japan
Model No.SKR20 ,SKR26, SKR33 , SKR46 etc
l X [mm 4 ]6.0x10 3 , 1.66x10
Mass[kg/m]2.6 , 3.9 , 6.1
Caged Ball LM Guide Actuator model SKR is a compact actuator that has a inner block consisting of LM blocks and a ball screw nut integrated inside a U-shaped outer rail. In addition, this model achieves high speed operation, lower noise and longer-term maintenancefree operation by using ball cages in the LM Guide units and the Ball Screw unit. (A ball cage is used only for the LM guide section of models SKR20 and SKR26 and the ball screws are fi tted with QZ lubricators.) 
Get Best QuoteRequest A Callback
THK Linear Bushing LMCF-L
  • THK Linear Bushing LMCF-L
  • THK Linear Bushing LMCF-L

THK Linear Bushing LMCF-L

Product Price: Rs 348 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Outer Diameter12 -40
Model No.LMCF 6L , LMCF 8L , LMCF 10L , LMCF 12L
Inscribed bore diameter6 -25
BrandTHK Japan
Flange diameter28 - 62
Since an LMIF flange is installed in the center for this type and and work can be attached close to the center of the linear bushing unit, both load and space are distributed on both sides of the flange in a balanced manner.This is a good solution for when you want to make the stroke equal on the left and right.
Get Best QuoteRequest A Callback
THK Linear Bushing LMIK-L
  • THK Linear Bushing LMIK-L
  • THK Linear Bushing LMIK-L

THK Linear Bushing LMIK-L

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Outer Diameter12 - 40
BrandTHK Japan
ModelLMIK 6L , LMIK 8L , LMIK 10L
Inscribed bore diameter6 -25
Since this model contains a synthetic resin retainer, do not use it at temperature exceeding 80℃. If requiring a type equipped with a seal, indicate it when placing an order.
Get Best QuoteRequest A Callback
THK Linear Guides Roller Type

THK Linear Guides Roller Type

Product Price: Rs 2,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
DesignStandard
Usage/ApplicationMachine Tools
MaterialBearing Steel
Size15
ColorSilver
BrandTHK Japan
Packaging TypeWooden Box
Rail LengthStandard length 3000mm
Thickness0.5
The THK Linear Guide (Linear Motion Guide) is our main product, incorporating a part with a linear rolling motion into practical usage for the first time in the world. It realizes the development of high-precision, high-rigidity, energy-saving, high-speed machines with long service lives.
Get Best QuoteRequest A Callback
Accessories for Lubrication Grease Gun Unit / Grease Nipple / Plimbing Fixture
  • Accessories for Lubrication Grease Gun Unit / Grease Nipple / Plimbing Fixture
  • Accessories for Lubrication Grease Gun Unit / Grease Nipple / Plimbing Fixture
  • Accessories for Lubrication Grease Gun Unit / Grease Nipple / Plimbing Fixture

Accessories for Lubrication Grease Gun Unit / Grease Nipple / Plimbing Fixture

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless Steel
Colorsilver,golden
TypeA-PT1/8 type , B-PT1/8 type , C-PT1/8 type
Model No.LF-A,LF-B
BrandTHK Japan
ScrewM6x0.75
Lubrication accessories. An assortment of lubrication associated products is available to maintain sufficient lubrication of machines. 
Get Best QuoteRequest A Callback
THK Slide Rail FBL/E15-20 / D20
  • THK Slide Rail FBL/E15-20 / D20
  • THK Slide Rail FBL/E15-20 / D20
  • THK Slide Rail FBL/E15-20 / D20

THK Slide Rail FBL/E15-20 / D20

Product Price: Rs 430 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
BrandTHK Japan
Permissible load N/pair260 - 180
Rail length L200 mm - 500 mm
Mass kg/pair0.32 -0.8
Inner rail5 ,6
A linear slide that combines a lightweight outer rail made of precision-extruded aluminum alloy with a highly wear-resistant resin bearing.
Get Best QuoteRequest A Callback
KHK Gear Assembly Kit GCU
  • KHK Gear Assembly Kit GCU
  • KHK Gear Assembly Kit GCU
  • KHK Gear Assembly Kit GCU

KHK Gear Assembly Kit GCU

Product Price: Rs 320 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/Applicationindustrial
Gear TypeMiter
Gear Ratio1
Weight1 kg
BrandKHK
  • There are 6 kinds according to the gear types (spur gear, bevel gear, rack and pinion, miter gear, screw gear, worm gear).
  • By seeing the various types of gears, one can experience how differently each type works.
  • The six types of kits can be freely connected so that one can confirm the changes in directions and number of rotations depending on how they are linked to each other.
  • The buyer can experience the basics of gear attachment by assembling the kits him/herself.
  • The gears used in these kits are not toys but are professional quality, actual components used in the machine industry.
Get Best QuoteRequest A Callback
KHK Gear Couplings GC/GC-I
  • KHK Gear Couplings GC/GC-I
  • KHK Gear Couplings GC/GC-I
  • KHK Gear Couplings GC/GC-I

KHK Gear Couplings GC/GC-I

Product Price: Rs 89 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
I Deal InNew Only
Catalog NumberGC1-I , GC2-I , GC3-I
Modelm2, m2.5
Inner diameter46 -100
Gear Couplings (Outer ring) (GC-I)

Gear teeth are induction hardened for durability, and are also standardized for easier connection.

Get Best QuoteRequest A Callback
THK Die-setting Ball Cage BS/KS
  • THK Die-setting Ball Cage BS/KS
  • THK Die-setting Ball Cage BS/KS
  • THK Die-setting Ball Cage BS/KS

THK Die-setting Ball Cage BS/KS

Product Price: Rs 270 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
MaterialStainless Steel
Usage/Applicationindustrial
Model No.BS 1955 , BS 2260 , BS 2565
Dynamic rating C11.7 kN - 22.5 kN
Static rating C04.22 kN - 10.9 kN
A ball cage mainly used in the guide of precision diesetting guide posts, and capable of easily following high-speed reciprocating motion.
Get Best QuoteRequest A Callback
THK Caged Ball LM Guide SVR/SVS
  • THK Caged Ball LM Guide SVR/SVS
  • THK Caged Ball LM Guide SVR/SVS
  • THK Caged Ball LM Guide SVR/SVS

THK Caged Ball LM Guide SVR/SVS

Product Price: Rs 300 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Payment TermsOnline
I Deal InNew Only
BrandTHK Japan
Max Speed200m/min
Models SVR/SVS have especially high rigidity and load carrying capacity among the Caged Ball LM Guide series. In addition, these models maintain the LM Guide performance and achieve high reliability through the strengthening of the dust proof performance with a broad range of options that take into account the service environments of machine tools, etc. * Since models SVR/SVS have very high rigidity, their structures are easily aff ected by the misalignment of the mounting surface and the installation error. If aff ected by these factors, their service life may be shortened or their motion may be disrupted. When considering using these models, contact THK.

 [Super Heavy Load, Increased Damping] The raceway of models SVR/SVS adopts a circular-arc deep groove with a curvature approximate to the ball diameter. Since the ball contact area increases as the applied load increases, a large load carrying capacity is achieved and damping is also improved.

[Increased Dust-proof Performance] The foreign material removal function is improved with a newly developed protector to strengthen the dust-proof performance. In addition, use of a side scraper reduces the entrance of foreign material into the LM block, thus maintaining the LM Guide performance for a long period even in adverse environments.


[High Rigidity] Models SVR/SVS achieve the highest rigidity among the Caged Ball LM Guide series. Both the radial type SVR and the 4-way equal load type SVS are available for the same size. Depending on the intended use, you can select either type.

[Wide Array of Options] Various options are available, including end seal, inner seal, side seal, Laminated Contact Scraper LaCS, protector, side scraper and Cap GC, to respond to diversifi ed service environments. 
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Apex Precision Mechatronix Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.