Linear Bush

THK LM Linear Ball Bush

Product Price: Rs 350 / CartonGet Best Price

Minimum Order Quantity: 1 Carton

Product Brochure

Product Details:

Inner Diameter	3mm
Outer Diameter	1.5 MM
Material	Bearing Steel & Stainless Steel
Brand	THK Japan
Type	Different Types Available
1	Box

The linear bushing is a linear motion product that is used in combination with a cylindrical LM shaft. The ball bearings in the load area offer point contact with the LM shaft. This allows straight motion with minimal friction resistance and therefore smooth motion.

Additional Information:

Delivery Time: 1 week
Packaging Details: wooden box

Get Best QuoteRequest A Callback

THK Linear Bushing LM-L

Product Price: Rs 330 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
Model No.	LM 3L , LM 4L ,LM 5L, LM 6L
Ball rows	4,5,6
Tolerance	0 -0.010 , 0 -0.012, 0 -0.015 etc
Band	THK Japan

Since this model contains a synthetic resin retainer, do not use it at temperature exceeding 80℃. If requiring a type equipped with a seal, indicate it when placing an order.

Get Best QuoteRequest A Callback

THK Linear Bushing LMF

Product Price: Rs 600 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Tolerance	0 -0.009 , 0 -0.010 etc
Usage/Application	Industrial
I Deal In	New Only
Model No.	LMF 6 , LMF 8S , LMF 8 , LMF 10
Ball rows	4,5,6

Since an ordinary circular flange is integrated with the nut, this model can easily be mounted.
Based on model LMF, this type has a square flange. Since the height is lower than the circular flange type, compact design is allowed.

Get Best QuoteRequest A Callback

THK Linear Bushing LMK-L

Product Price: Rs 1,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Outer Diameter	12 - 90
Usage/Application	Industrial
Model No.	LMK 6L , LMK 8L
Ball rows	4,5,6
Inscribed bore diameter	6,10,12,20,25,60 etc

The flange is a cut flange and lower than model LMK-L, allowing compact design. Containing two units of the standard retainer plate, this type is optimal for locations where a moment load is present. Since the rows of balls in the Linear Bushing are arranged so that two rows receive the load from the flat side, a long service life can be achieved.

Get Best QuoteRequest A Callback

THK Linear Bushing LMH

Product Price: Rs 950 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Material	Stainless Steel
Usage/Application	Industrial
Model No.	LMH 6 , LMH 8S , LMH 8
Ball rows	4,5,6
Inscribed bore diameter	6-30
Brand	THK Japan

Since an oval flange is integrated with the nut, a lower core height and more compact design than model LMK are achieved.

Get Best QuoteRequest A Callback

THK Linear Bushing LMH-L

Product Price: Rs 600 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Tolerance	0 -0.010
Usage/Application	Industrial
I Deal In	New Only
Model	LMH 6L , LMH 8L , LMH 10L
Ball rows	4,5,6
Inscribed bore diameter	6 - 30

Like model LMF-L, this type also has a flange, but the flange is cut to a square shape. Since the height is lower than the circular flange type, compact design is allowed.
Model LMK-L…………Standard type

Get Best QuoteRequest A Callback

THK Linear Roller Guide SRG

Product Price: Rs 430 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
Brand	THK Japan
Length	3090 , 3060 , 3000
Model No.	SRG 15 -100
Width	34 -63

SRG is an ultra-high rigidity Roller Guide that uses roller cages to allow low-friction, smooth motion and achieve long-term maintenance-free operation.

[Ultra-high Rigidity]A higher rigidity is achieved by using highly rigid rollers as the rolling elements and having the overall roller length more than 1.5 times greater than the roller diameter.

[4-way Equal Load]Since each row of rollers is arranged at a contact angle of 45???so that the LM block receives an equal load rating in all four directions (radial, reverse radial and lateral directions), high rigidity is ensured in all directions.

[Smooth Motion through Skewing Prevention]The roller cage allows rollers to form an evenly spaced line while circulating, thus preventing the rollers from skewing as the block enters an loaded area. As a result, fl uctuation of the rolling resistance is minimized, and stable, smooth motion is achieved.
[Long-term Maintenance-free Operation]Use of roller cages eliminates friction between rollers and increases grease retention, enabling longterm maintenance-free operation to be achieved.
[Global Standard Size]SRG is designed to have dimensions almost the same as that of Full Ball LM Guide model HSR, which THK as a pioneer of the linear motion system has developed and is practically a global standard size.

Get Best QuoteRequest A Callback

THK Linear Guide HSR15

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Design	Standard
Usage/Application	Industrial
Features	High Durability , Self-adjustment Capability
Outer dimensions Height	24 -90
Outer diameter Width	47 -170

Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. The high temperature type LM Guide is capable of being used at service temperature up to 150℃ thanks to THK’s unique technologies in material, heat treatment and lubrication.

Get Best QuoteRequest A Callback

THK Linear Guide HSR55

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
Material	Stainless Steel
Features	4-way Equal Load , High Rigidity Type
Outer dimensions Height	24 - 90
Outer diameter Width	47 -170

Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. The high temperature type LM Guide is capable of being used at service temperature up to 150℃ thanks to THK’s unique technologies in material, heat treatment and lubrication.

Get Best QuoteRequest A Callback

THK Linear Guide SR70

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
Material	Stainless Steel
Features	Compact, Heavy Load , Low Noise
Brand	THK Japan
Deal In	New Only

Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since a retainer plate holds the balls, they will not fall off even if the LM block is removed from the LM rail. With the low sectional height and the high rigidity design of the LM block, this model achieves highly accurate and stable straight motion.

Get Best QuoteRequest A Callback

THK Linear Guide SR85

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
Material	Stainless Steel
Features	Low Noise , High Durability
Brand	THK Japan
Deal In	New Only

Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since a retainer plate holds the balls, they will not fall off even if the LM block is removed from the LM rail. With the low sectional height and the high rigidity design of the LM block, this model achieves highly accurate and stable straight motion.

Get Best QuoteRequest A Callback

THK Linear Guide HSR10

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
Features	High Durability
Outer dimensions Height	13
Outer diameter Width	20
Outer dimensions Length	31

Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off even if the LM rail is pulled out (except models HSR 8, 10 and 12). Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. In addition, the LM block can receive a well-balanced preload, increasing the rigidity in the four directions while maintaining a constant, low friction coeffi cient. With the low sectional height and the high rigidity design of the LM block, this model achieves highly accurate and stable straight motion

Get Best QuoteRequest A Callback

THK Wide Linear Guide HRW17

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
Outer dimensions Height	17
Brand	THK Japan
Outer dimensions Length	50.8
Outer Dimensions Width	60

Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate. Since retainer plates hold the balls, they do not fall off even if the LM rail is pulled out. (except models HRW 12 and 14LR). Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. In addition, the LM block can receive a well-balanced preload, increasing the rigidity in four directions while maintaining a constant, low friction coeffi cient. In a low center of gravity structure with a large rail width and a low overall height, this model can be used in places where space saving is required or high rigidity against a moment is required even in a single axis confi guration.

Get Best QuoteRequest A Callback

THK Wide Linear Guide SHW35

Product Price: Rs 178 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
Material	Stainless Steel
Color	Silver
Features	Low Dust Generation
Length	37 - 141

A wide and highly rigid LM Guide that uses ball cages to achieve low noise, long-term maintenancefree operation and high speed. [Wide, Low Center of Gravity] Model SHW, which has a wide LM rail and a low center of gravity, is optimal for locations requiring space saving and large M C moment rigidity. [4-way Equal Load] Each row of balls is placed at a contact angle of 45 so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations and in extensive applications. [Self-adjustment Capability] The self-adjustment capability through front-to-front configuration of THK’s unique circular-arc grooves (DF set) enables a mounting error to be absorbed even under a preload, thus to achieve highly accurate, smooth straight motion. [Low Dust Generation] Use of ball cages eliminates friction between balls and retains lubricant, thus achieving low dust generation.

Get Best QuoteRequest A Callback

THK LM Linear Bush

Product Price: Rs 3,000 / PieceGet Best Price

Product Brochure

Product Details:

Inner Diameter	3mm
Material	Stainless Steel
Brand	THK Japan
Packaging Type	Wooden Box
Shape	cylindrical type, cylindrical type-long, Flanged type-round shape, Flanged type -square shape
Usage/Application	Industrial
Surface Finish	Matt

Linear Bushing Model LM is a linear motion system used in combination with a cylindrical LM shaft to perform infinite straight motion.

Additional Information:

Delivery Time: 1 week
Packaging Details: Wooden Box

Get Best QuoteRequest A Callback

THK Self-aligning NSR-TBC

Product Price: Rs 350 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
I Deal In	New Only
Type of guide	Ball
Dust cover type	Bellows, LM Cover
Seal Resistance Value (N)	4.90
Standard grease	AFB-LF

Model NSR-TBC is highly capable of performing self-adjustment and self-alignment. As a result, even if two rails are not mounted with accuracy

Get Best QuoteRequest A Callback

THK Linear Bushing LMF-L

Product Price: Rs 1,800 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
Model No.	LMF 6L , LMF 8L , LMF 10L
Ball rows	4,5,6
Tolerance	0 -0.010 , 0 -0.016 , 0 -0.015
Brand	THK Japan

The model LMF-L, this type also has a flange, but the flange is cut to a square shape. Since the height is lower than the circular flange type, compact design is allowed.

Get Best QuoteRequest A Callback

THK Guide Ball Bushing LG

Product Price: Rs 400 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Usage/Application	Industrial
I Deal In	New Only
Brand	THK Japan
Model No.	LG4S , LG4L
Shaft Diameter	4,6,8

Since model LG has 4 rows of circular arc grooves (raceways), it achieves a load rating more than twice that of point-contact Linear Bushing model LM with the same size.

Get Best QuoteRequest A Callback

THK Linear Motion Bush with Housing SC

Product Price: Rs 1,760 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Inner Diameter	6mm
Material	Bearing Steel & Stainless Steel
Brand	THK Japan
Type	Ball Bush with Housing
Packaging Type	Wooden Box
Quantity Per Pack	1

It is a case unit where the standard type of Linear Bushing is incorporated into a small, lightweight aluminum casing. This model can easily be mounted simply by securing it to the table with bolts.

Additional Information:

Delivery Time: 1 week
Packaging Details: Wooden Box

Get Best QuoteRequest A Callback

THK LM Guide HSR

Product Price: Rs 990 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:

Brand Name	THK Japan
Brand	THK Japan
Height	24 - 90
Standard grease	AFB-LF
Long-term Maintenance-free Operation	Available
Maximum service temperature(Fahrenheit DegreeF)	176
Seal Resistance Value (N)	2.00

Balls roll in four rows of raceways precision-ground on an LM rail and an LM block, and endplates incorporated in the LM block allow the balls to circulate.Since retainer plates hold the balls, they do not fall off even if the LM rail is pulled out (except models HSR 8, 10 and 12).Each row of balls is placed at a contact angle of 45??? so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations. In addition, the LM block can receive a well-balanced preload, increasing the rigidity in the four directions while maintaining a constant, low friction coeffi cient. With the low sectional height and the high rigidity design of the LM block, this model achieves highly accurate and stable straight motion.[4-way Equal Load] Each row of balls is placed at a contact angle of 45??? so that the rated loads applied to the LM block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the LM Guide to be used in all orientations and in extensive applications.

[High Rigidity Type]Since balls are arranged in four rows in a well-balanced manner, a large preload can be applied and the rigidity in four directions can easily be increased.

[Self-adjustment Capability]The self-adjustment capability through front-to-front configuration of THK’s unique circular-arc grooves (DF set) enables a mounting error to be absorbed even under a preload, thus to achieve highly accurate, smooth straight motion.

[High Durability]Even under a preload or excessive biased load, diff erential slip of balls does not occur. As a result,smooth motion, high wear resistance, and long-term maintenance of accuracy are achieved.

[Stainless Steel Type also Available]A special type which LM block, LM rail and balls are made of stainless steel is also available.

Get Best QuoteRequest A Callback

THK LM Linear Ball Bush

THK Linear Bushing LM-L

THK Linear Bushing LMF

THK Linear Bushing LMK-L

THK Linear Bushing LMH

THK Linear Bushing LMH-L

THK Linear Roller Guide SRG

THK Linear Guide HSR15

THK Linear Guide HSR55

THK Linear Guide SR70

THK Linear Guide SR85

THK Linear Guide HSR10

THK Wide Linear Guide HRW17

THK Wide Linear Guide SHW35

THK LM Linear Bush

THK Self-aligning NSR-TBC

THK Linear Bushing LMF-L

THK Guide Ball Bushing LG

THK Linear Motion Bush with Housing SC

THK LM Guide HSR

EXPLORE MORE CATEGORIES

Ball Screws

Linear Guide

ball screw

Ball Transfer Unit

LM Guide

Industrial Bearings